«

»

Phanteks Enthoo Primo Case Review

PAGE INDEX

<< PREVIOUS            NEXT >>

Phanteks Enthoo Primo Overview

The Phanteks Enthoo Primo computer case boasts a modern, minimalist design: it looks cool and futuristic while maintaining simplicity. It’s full black, brushed aluminum aluminum body adds a sense of sophistication, and the blue led running along the face to the top make’s it looks like something you would find in Bruce Wayne’s residence.

Enthoo_Primo_3

This case is about as big as they get, it is huge! Standing at about 2 feet, it is 2 inches shy of the 900D’s height. Anyone in the market for a case such as this would most likely be filling it with some serious hardware, Phankteks has taken that into consideration and provided a large glass window side panel to show it off.

Enthoo_Primo_14

The Enthoo Primo will certainly turn a lot of heads with it’s unique off-center design. The lower section of the front panel acts an intake and dust filters for the two 140mm fans behind it.

Enthoo_Primo_6

The right side panel can be fitted with 2 120/140mm fans or a radiator for a water-cooled system provided one of the hard drive cages are removed. It also has a vent for PSU air intake.

Enthoo_Primo_9

The Enthoo Primo features a shield for all the storage devices. Immediately to the left of it is a mounting bracket for water reservoirs that can be removed to allow for clearance of longer graphic cards.
Enthoo_Primo_13
Thick rubber pads are fastened to the Enthoo Primo’s underside to ensure that this behemoth of a case won’t be accidentally pushed around .

Enthoo_Primo_12

When it comes to case fans, the Phanteks PH-F140SP is just about the best you can get; they offer efficient cooling at low noise levels. Phanteks have included five of them with the Enthoo Primo, 2 blue led, and 3 regular ones.


SKIP TO PAGE:

<< PREVIOUS            NEXT >>